A
amdx
I have a 1 volt 5hz triangle wave setting on 4vdc, I need
to lower the 4vdc to 1vdc. (This is chip #1 output)
I'm driving pin 7 of a XR2206, you adjust frequency by sinking
between 1ua and 3ma from this pin. (This is chip #2 input)
Chip #1 is driving a 4.7k resitor with a 220kohm to ground.
Chip #2 Pin 7 is connected to the junction of the 4.7k and 220kohm.
I want to avoid a negative supply.
Thanks, Mike
to lower the 4vdc to 1vdc. (This is chip #1 output)
I'm driving pin 7 of a XR2206, you adjust frequency by sinking
between 1ua and 3ma from this pin. (This is chip #2 input)
Chip #1 is driving a 4.7k resitor with a 220kohm to ground.
Chip #2 Pin 7 is connected to the junction of the 4.7k and 220kohm.
I want to avoid a negative supply.
Thanks, Mike