Maker Pro
Maker Pro

Need Help ID'ing Older Dipped Tanatalums

T

Tim

OK, I have been trying to figure this out via the net, and I am finding
that every site I check only deals with the newer colour codes with the
"dot" on the cap.

My caps have no dot. They are coded as follows;

Brown
Black
Green

Blue stripe painted top to bottom over one lead.

Now I take this to mean it's a 1uf (1,000,000 pf) 35V cap with the blue
strip indicating the + lead and the voltage.

Anyone know this stuff or could point me to a decent site?

Thanks,

- Tim -
 
L

Lund-Nielsen, Jorgen

Am 04.09.2011 00:03, schrieb Tim:
OK, I have been trying to figure this out via the net, and I am finding
that every site I check only deals with the newer colour codes with the
"dot" on the cap.

My caps have no dot. They are coded as follows;

Brown
Black
Green

Blue stripe painted top to bottom over one lead.

Now I take this to mean it's a 1uf (1,000,000 pf) 35V cap with the blue
strip indicating the + lead and the voltage.

Anyone know this stuff or could point me to a decent site?

Thanks,

- Tim -

Maybe its shown here?

<http://www.imagebanana.com/view/n37z406m/tantal.jpg>


HTH

Jorgen
dj0ud
 
Top