Need Help Identifying Collector, Emitter, and Base

[GeneralBones]

Hey guys. I got a W9NK90Z from a power supply and was hoping to use it for a slayer exciter Tesla coil. I found the data sheet but I can't identify which pins belong to the emitter, base, and collector. Here's the data sheet:
https://www.google.com/url?sa=t&sou...smxTLT7765ndBXaGw&sig2=2cV-nBgJEiA8nacM4RUgQg

 

[davenn]

I found the data sheet but I can't identify which pins belong to the emitter, base, and collector.

it doesn't have E, B and C because it is a FET
It has a G, D and S gate drain and source and your datasheet shows which is which

 

[shrtrnd]

Translation in case you need it: (Google FET)
FET = Field Effect Transistor

 

[GeneralBones]

Ohhh okay so I can't use this for a Tesla coil? I'm assuming it won't work like a transistor with e b & c

 

[davenn]

Ohhh okay so I can't use this for a Tesla coil? I'm assuming it won't work like a transistor with e b & c

well you haven't shown us any circuit so that we can advise you ???

 

[GeneralBones]

Something like this except with a bigger coil and PSU, something like 12v-24v idk I'll experiment. I already mad thst circuit and it works pretty well

 

[duke37]

A fet will work as a replacement for a bjt. You will need less control current but much more voltage. You still have not shown a schematic (US).