Need Help Finding A Replacement Encoder

[radiotek]

Trying to find a replacement mechanical encoder for a Sangean ATS-505 radio I own. The decoder is approximately 11 to 12mm square that's vertically mounted and has a total of 5 contacts, 3 for tuning up and down and 2 for a switch.

Not sure how many detentes but I am sure that anything between 16 and 24 should be OK.

Any help would be greatly appreciated.

 

[Tha fios agaibh]

Try ebay

 

[Ylli]

Check out the Bourns PEC12R series. There is also a PEC11 if it is actually 11mm square.
https://www.google.com/url?sa=t&rct...s/PEC12R.pdf&usg=AOvVaw1gyvb0qrT_z6WLUpXL0r8F

 

[radiotek]

Thanks a lot for the links. In the meantime I did some more searching and found almost the exact one made by ALPS..

Thanks again.