G
Guest
Hi all. I fixed the NAD 2400 dropout problem. C403 & C453 were shorted.
Left one read 400 ohms to ground, right one read 60 ohms to ground. Replaced
with unshorted caps, DC at speaker outputs is about .025 volts on each side,
and no protect dropout. Heat sinks run cooler too.
Again, many thanks,
Danny
Left one read 400 ohms to ground, right one read 60 ohms to ground. Replaced
with unshorted caps, DC at speaker outputs is about .025 volts on each side,
and no protect dropout. Heat sinks run cooler too.
Again, many thanks,
Danny
