Hey All
Well yesterday i was testing my Robot Truck it didn't move at first until i increased the speed to the maximum it started moving for 5 seconds then my encoder smoked after that happened i didn't understand the meaning of stall current until then so here is what the data sheet look like:
I did drive using a this encoder :
Which smoked the maximum output amp was 4.5A
Can you help me guys choosing the right motor driver ?
and can i use a 2A H-bridge + a relay to drive this motor ?
Thanks.
Well yesterday i was testing my Robot Truck it didn't move at first until i increased the speed to the maximum it started moving for 5 seconds then my encoder smoked after that happened i didn't understand the meaning of stall current until then so here is what the data sheet look like:
![nqU3yxn.png](/forums/proxy.php?image=http%3A%2F%2Fi.imgur.com%2FnqU3yxn.png&hash=f05d743a60253785a636a557ef0d171b)
I did drive using a this encoder :
![dagu-4-channel-brushed-dc-motor-controller.jpg](/forums/proxy.php?image=http%3A%2F%2Fwww.robotshop.com%2Fmedia%2Fcatalog%2Fproduct%2Fcache%2F1%2Fimage%2F800x800%2F9df78eab33525d08d6e5fb8d27136e95%2Fd%2Fa%2Fdagu-4-channel-brushed-dc-motor-controller.jpg&hash=0d682392acf141a3c6d879e960eac40e)
Which smoked the maximum output amp was 4.5A
Can you help me guys choosing the right motor driver ?
and can i use a 2A H-bridge + a relay to drive this motor ?
Thanks.