my french 1 h/p single phase motor only runs if I pull the belt bit stops under load.

[daved]

 

[Bluejets]

In place of providing a number of pics of the same view, how about one or two of a panned out view.
Is the motor as built or have you dismantled it?

 

[Minder]

You require a replacement start or start-run capacitor.

 

[daved]

In place of providing a number of pics of the same view, how about one or two of a panned out view.
Is the motor as built or have you dismantled it?

 

[daved]

 

[daved]

The motor is as built. \l have trouble uploading pictures, when the motor runs after pulling the belt it gets very hot I have to switch it off. I wondered if the connections or the capacitor are ok.

 

[daved]

The motor is as built. \l have trouble uploading pictures, when the motor runs after pulling the belt it gets very hot I have to switch it off. I wondered if the connections or the capacitor are ok.

 

[Bluejets]

Sounds a lot like the start winding is cooked.
Not really a diagnosis job for the inexperienced or those who lack the required test equipment.