P
Peter
Hi
The setting up of the KFC225 autopilot requires a "certification
diskette" which contains the control loop parameters for the
particular roll servo, etc.
I am trying to get my hands on a copy of this file. Honeywell have
stopped making this product and the way things look, in years to come
it is going to become very hard to get any work done on these units.
Already, very few European dealers have the capability to work on this
product.
The diskette P/N is 225-00044-00XX where XX is 15 or higher, but I
cannot find a reference in the KFC225 installation manual to the
actual P/N. The full P/N varies according to the roll servo in use;
mine is a KS271C 065-00179-0200.
My email is below
peter
at
peter2000
dot
co
dot
uk
I've got a large collection of avionics manuals so if you need
anything in return, drop me an email
Thank you!
The setting up of the KFC225 autopilot requires a "certification
diskette" which contains the control loop parameters for the
particular roll servo, etc.
I am trying to get my hands on a copy of this file. Honeywell have
stopped making this product and the way things look, in years to come
it is going to become very hard to get any work done on these units.
Already, very few European dealers have the capability to work on this
product.
The diskette P/N is 225-00044-00XX where XX is 15 or higher, but I
cannot find a reference in the KFC225 installation manual to the
actual P/N. The full P/N varies according to the roll servo in use;
mine is a KS271C 065-00179-0200.
My email is below
peter
at
peter2000
dot
co
dot
uk
I've got a large collection of avionics manuals so if you need
anything in return, drop me an email
Thank you!
