Maker Pro
Maker Pro

looking for CS7 Thermostat

Hello,
I'm looking for a Clinac (normally closed) thermostat in my
cofee maker. The marking is "Clinac CS-7S 145 1277".
Is it correct to deduce that it opens at 145°C approx.? I
found approaching things, but nowhere found the 1277 marking. What doet it mean ?
And how to test if it opens correctly ?
 
:)
Re: "Is it correct to deduce that it opens at 145°C approx.?"

A teacher of logic would say that it is fundamentally incorrect to deduce any such thing!
Please excuse any irony in my reply. Errors in characterising electronic components can be fatal - even literally so if bad design is also a factor.

I used google. I used this keyphrase: "Clinac CS-7S 145 1277".
The first result was a link to the manufacturer's data sheet.

To test such a component, I would find some way to suspend it in open air while it is connected to a continuity tester. I would play a hot air gun from about half a meter and watch the tester... come a little closer and again give it time to warm up,,, and keep coming closer until I either get a good result or become disgusted.
 
Top