Looking for 0.050" (1.27mm) Cable Mount Headers

[sms]

I'm working on a design where the 0.1" standard IDC connectors are too
large. So I thought of the 0.050" (127mm) connectors.

The thing is that I need some cable mount headers and these seem to only
be available in 0.1".

Essentially I need this:
<http://www.king-cart.com/phoenixent...C+HEADERS+%26+DIP+IDC+PLUGS/exact_match=exact>
in 0.05" spacing.

The closest I found was this:
<http://www.donconnex.com.tw/php/show.php?category=a32a> which would do
even without the shroud, but I can't get a small quantity of them.

 

[Martin Riddle]

I'm working on a design where the 0.1" standard IDC connectors are too
large. So I thought of the 0.050" (127mm) connectors.

The thing is that I need some cable mount headers and these seem to only
be available in 0.1".

Essentially I need this:
<http://www.king-cart.com/phoenixent...C+HEADERS+%26+DIP+IDC+PLUGS/exact_match=exact>
in 0.05" spacing.

The closest I found was this:
<http://www.donconnex.com.tw/php/show.php?category=a32a> which would do
even without the shroud, but I can't get a small quantity of them.

FCI?
<http://www.mouser.com/ProductDetail...keI0IBih8tP70jOEeEznu6LD9Pgeefe8LD7OI/IXNog==>

I think 3M also has a series, but I dont recall then name at the
moment.

Cheers