Maker Pro
Maker Pro

Light sensor motor control

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
I don't see anywhere where a 10W resistor would be needed.

Details matter when you're drawing circuit diagrams.
 
You may find the circuit in the first photo helpful. It is marked with the components I used in the prototype in the second photo.
I used two 6 volt motors in lieu of one 12 volt motor.
 

Attachments

  • circuit.png
    circuit.png
    39 KB · Views: 7
  • proto.JPG
    proto.JPG
    197.7 KB · Views: 6
I see this could also work. The circuit from Alec_t is a little simpler and seems to accomplish what I need. I will keep this in mind. Thanks for your help.
 
Top