Hello All,
I was checking out some youtube videos on electronic issues with cars and found this great site where there was a bad ground on the, left front, parking light/turn signal circuit on a 2008 dodge charger. I reproduced the circuit on a breadboard as a learning experience. I have it working, and I can break it too by removing the ground wire.
I am new to electronics, and I feel good about this learning experience. I have "momentary on" switches in place now but will add a turn signal relay for the turn signal circuit.
Please tell me what you think. Thanks
I was checking out some youtube videos on electronic issues with cars and found this great site where there was a bad ground on the, left front, parking light/turn signal circuit on a 2008 dodge charger. I reproduced the circuit on a breadboard as a learning experience. I have it working, and I can break it too by removing the ground wire.
I am new to electronics, and I feel good about this learning experience. I have "momentary on" switches in place now but will add a turn signal relay for the turn signal circuit.
Please tell me what you think. Thanks
Attachments
-
turnsignal_parkinglights_bad_ground_edit_1.jpg83.8 KB · Views: 10
-
turnsignal_parkinglights_bad_ground_2.jpg122.4 KB · Views: 9
-
turnsignal_parkinglights_bad_ground_3.jpg117.1 KB · Views: 7
-
turnsignal_parkinglights_bad_ground_4.jpg105.5 KB · Views: 6
-
turnsignal_parkinglights_bad_ground_5.jpg157.7 KB · Views: 6
-
Parking_light_circuit_2.jpg115.3 KB · Views: 7