lcd tft panel sharp model # lq9d161

[fingaz22]

i'm tring to take a composite video signal say from a dvd player and
turn it into a rgb datastream or something this flat panel tft i have
can use to reproduce.

the panel has a 31 pin connector on the back of it and 16 of those pins
are for the rgb, 4 for each ,making up the 12 bit monitor that it is, 2
for the horizontal & vertical sync signals , 1 for the clock signal , 1
to settle the horizontal display position and a few for power & grds.
the others are test pins.

so looking for a convertor or what i would need to do to accopmlish
this project. thank you very much for your time.

 

[C. Wozniak]

i'm tring to take a composite video signal say from a dvd player and
turn it into a rgb datastream or something this flat panel tft i have
can use to reproduce.
so looking for a convertor or what i would need to do to accopmlish
this project. thank you very much for your time.

Something like this board set may work for you.

http://store.earthlcd.com/CNT-EV-gm2221-LCD-Controller

I don't work for them but have used one of their other products in the
past.