I have a Kustom organ from the '60's. It had Tabs on it that make and break contact with a bar to turn on and off different tones. The contact is a "spring-like" piece approximately 3/8" long. The little metal bar comes up from the pcb in one hole and back out in another hold. When the tab is actuated it has a lever system that brings the "spring-like" contact into contact with that bar to complete the circuit. The little metal bar looks like a tiny hitching railing for horses.
The weakness in this system is that the "spring-like" contacts break with wear and tear. They are soldered into the board. Does anyone know where you can find this type of contact?
The weakness in this system is that the "spring-like" contacts break with wear and tear. They are soldered into the board. Does anyone know where you can find this type of contact?