S
Simoc
Hello!
I picked up a tossed JVC HR-D540E VCR. Yes, both the brass pins and
the white plastic linkage pins fallen off from the roller guide
assemblies. After replacing them, the VCR seems to be working fine.
But, there were a few more parts lying on the bottom of the device,
and I haven't find places where they should go. Does anyone know?
- A black plastic pin ("double-sided" non-symmetric)
http://www.aijaa.com/v.php?i=1020388.jpg
- A spring, about 4mm long and 2,5mm diameter
http://www.aijaa.com/v.php?i=1020405.jpg
- A plastic insulating piece
http://www.aijaa.com/v.php?i=1020369.jpg
Here are some additional pictures of the device, if they help...
Front/top:
http://www.aijaa.com/v.php?i=1020325.jpg
Top:
http://www.aijaa.com/v.php?i=1020313.jpg
Mech:
http://www.aijaa.com/v.php?i=1020290.jpg
http://www.aijaa.com/v.php?i=1020300.jpg
Bottom:
http://www.aijaa.com/v.php?i=1020344.jpg
Thanks in advance.
I picked up a tossed JVC HR-D540E VCR. Yes, both the brass pins and
the white plastic linkage pins fallen off from the roller guide
assemblies. After replacing them, the VCR seems to be working fine.
But, there were a few more parts lying on the bottom of the device,
and I haven't find places where they should go. Does anyone know?
- A black plastic pin ("double-sided" non-symmetric)
http://www.aijaa.com/v.php?i=1020388.jpg
- A spring, about 4mm long and 2,5mm diameter
http://www.aijaa.com/v.php?i=1020405.jpg
- A plastic insulating piece
http://www.aijaa.com/v.php?i=1020369.jpg
Here are some additional pictures of the device, if they help...
Front/top:
http://www.aijaa.com/v.php?i=1020325.jpg
Top:
http://www.aijaa.com/v.php?i=1020313.jpg
Mech:
http://www.aijaa.com/v.php?i=1020290.jpg
http://www.aijaa.com/v.php?i=1020300.jpg
Bottom:
http://www.aijaa.com/v.php?i=1020344.jpg
Thanks in advance.