P
Phil Hobbs
Hi, all,
I have an offshore customer who wants to work together on some dual-use
infrared imaging technology. That of course is one of the hot buttons
of ITAR, so in order to make sure that I stay out of jail, I'll need at
very least to get an official determination of whether it's allowed or
not. (There's a documented process for doing that--apparently you just
send in a description of what you're planning to do, and they tell you
"yes" or "no".)
Back in the day (like around 2001, the last time I needed to worry about
this) there was a specific exemption in the US Munitions List for
infrared imagers using PVDF, but that seems to be gone now, so I have to
be extra-careful.
I know that big military contractors have whole departments devoted to
ITAR compliance, but I have no idea what's it like for small outfits.
I'd like to do the work, because it's interesting and might actually
advance the cause of civilization a little, but it isn't worth risking
that kind of trouble.
What I'd like to know is if anyone here has experience doing
ITAR-controlled work, especially in a small outfit. Easy? Dangerous?
Thanks
Phil Hobbs
--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC
Optics, Electro-optics, Photonics, Analog Electronics
160 North State Road #203
Briarcliff Manor NY 10510 USA
+1 845 480 2058
hobbs at electrooptical dot net
http://electrooptical.net
I have an offshore customer who wants to work together on some dual-use
infrared imaging technology. That of course is one of the hot buttons
of ITAR, so in order to make sure that I stay out of jail, I'll need at
very least to get an official determination of whether it's allowed or
not. (There's a documented process for doing that--apparently you just
send in a description of what you're planning to do, and they tell you
"yes" or "no".)
Back in the day (like around 2001, the last time I needed to worry about
this) there was a specific exemption in the US Munitions List for
infrared imagers using PVDF, but that seems to be gone now, so I have to
be extra-careful.
I know that big military contractors have whole departments devoted to
ITAR compliance, but I have no idea what's it like for small outfits.
I'd like to do the work, because it's interesting and might actually
advance the cause of civilization a little, but it isn't worth risking
that kind of trouble.
What I'd like to know is if anyone here has experience doing
ITAR-controlled work, especially in a small outfit. Easy? Dangerous?
Thanks
Phil Hobbs
--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC
Optics, Electro-optics, Photonics, Analog Electronics
160 North State Road #203
Briarcliff Manor NY 10510 USA
+1 845 480 2058
hobbs at electrooptical dot net
http://electrooptical.net