Maker Pro
Maker Pro

Integrated powerline modem

S

SBS

Hi,
I am looking for both an integrated (IC) powerline
modem and an integrated comunication "error controller".
I need the second device because I've heard someone
saying about the powerline which it might be full of noise
(caused by switching power devices).

I have to build a small network of current sensor at my
home, where each host (sensor) talks with the main unit
through the powerline.

Can anyone help me, please?

PS. I would be happy to know any projetc/experience
right done.
 
S

SBS

Jamie ([email protected]) ha scritto:

:: have you looked into X10 units?, they are for homes and
:: come with a list of options ..

Are they integrated circuits?
 
J

Jamie

SBS said:
Hi,
I am looking for both an integrated (IC) powerline
modem and an integrated comunication "error controller".
I need the second device because I've heard someone
saying about the powerline which it might be full of noise
(caused by switching power devices).

I have to build a small network of current sensor at my
home, where each host (sensor) talks with the main unit
through the powerline.

Can anyone help me, please?

PS. I would be happy to know any projetc/experience
right done.
have you looked into X10 units?, they are for homes and
come with a list of options ..
 
J

Jamie

SBS said:
Jamie ([email protected]) ha scritto:

:: have you looked into X10 units?, they are for homes and
:: come with a list of options ..

Are they integrated circuits?
yes, built in side a nice enclosure to boot!
what were you really asking for ?
 
J

Jamie

SBS said:
Jamie ([email protected]) ha scritto:

:: what were you really asking for ?

I was asking for something like these: ST7538, ST7540
http://www.st.com/stonline/products/literature/ds/9324/st7538.htm

I have to build a system (as described some posts above) for
my graduation thesis.

Can anyone help me, please?
i think you better do the research your self.
what your asking for, involves a lot of work
on your part.
but i must say, you're on the right track.
http://www.wave-report.com/tutorials/bpl.htm
read that. that may help you in your report.
 
C

Chris

SBS said:
Homer J Simpson ([email protected]) ha scritto:

:: Cross post, DON'T multi post.

Posts on different groups aren't linked.

Hi, SBS. Since you seems to be new to this, you should know that it's
considered good form to crosspost to several groups (if you must)
rather than individually post to several groups. There's no point in
making this several conflicting conversations when one will do. You
might want to check out Google Groups Help Topic "What's good
'netiquette' when posting to Usenet?"

http://groups.google.com/support/bin/answer.py?answer=12348&topic=250

Congratulations on finding your senior project on line.

Cheers
Chris
 
Top