Maker Pro
Maker Pro

Impendance and current flow?!

Can anyone work out the impendance and the current flowing through this parrallel circuit? Has to be in both cartesian and polar form but I don't have time to complete this task!

I need all workings out!

Data set 10 please

I've attached photos!
 

Attachments

  • IMG_3862.JPG
    IMG_3862.JPG
    142.1 KB · Views: 82
  • IMG_3864.JPG
    IMG_3864.JPG
    201.1 KB · Views: 79

Harald Kapp

Moderator
Moderator
We will not do your homework. We will gladly help you get along with your own work once you show us your own effort and where you are stuck.
This is forum policy.

Show us what you have done so far, any solutions you've found and we'll check that. When you are stuck, tell us where and we'll give you nudges in the right direction to keep you going.
 
If you want some guidance, think about the similarities between impedance and resistances in parallel.... write down the impedances for each of the components (possibly using phasors?) and see where that takes you.
 
Top