Maker Pro
Maker Pro

Honda eu10i inverter

Hi guys,
I need info on my inverter please.
I have a Honda eu10i inverter which seems to run ok, however, when I plug an item into the AC socket there is not enough power and inverter runs up and down erratically. Any idea on what is wrong. All items I have tried are below 800 watts. TIA
 
First check that you have clean fuel and air filter.

If your Honda is like my non-Honda unit then the carburettor is controlled using a small stepper motor and controlled electronically. Check that the shaft movement is free (not sticky) - this isn't easy but you could do worse than squirt some WD40 at it to help it anyway.
 
First check that you have clean fuel and air filter.

If your Honda is like my non-Honda unit then the carburettor is controlled using a small stepper motor and controlled electronically. Check that the shaft movement is free (not sticky) - this isn't easy but you could do worse than squirt some WD40 at it to help it anyway.
Thanks for your advice. I will try that tomorrow.
 
Top