Maker Pro
Maker Pro

Help: UK source needed for low profile PCB power relay

J

JB

I need a UK or possibly European source for some PCB mounted power relays.

Contact type: Single Pole Normally Open contacts (SPST)
Coil voltage: 24VDC
Coil current: 10mA (max)
Switching current: 16A(resistive), 4A(inductive).
Mechanical specs:
Length: <30mm
Width: <30mm
Height: <13mm (including pins)

We'll need these for an ongoing project in lots of 250/500pcs and will
require delivery and pricing for 1000/5000/10000pcs.

If anyone can help, please contact me directly or leave a reply here.

thanks,
JB

j b y r n e AT d e x t r a l i g h t i n g . c o . u k
 
M

martin griffith

I need a UK or possibly European source for some PCB mounted power relays.

Contact type: Single Pole Normally Open contacts (SPST)

Coil voltage: 24VDC
Coil current: 10mA (max)

Switching current: 16A(resistive), 4A(inductive).
Mechanical specs:
Length: <30mm
Width: <30mm
Height: <13mm (including pins)

We'll need these for an ongoing project in lots of 250/500pcs and will
require delivery and pricing for 1000/5000/10000pcs.

If anyone can help, please contact me directly or leave a reply here.

thanks,
JB

j b y r n e AT d e x t r a l i g h t i n g . c o . u k
Hmmm, looks a on the optomistic side, 24V @10mA




martin
 
S

Spehro Pefhany

Coil voltage: 24VDC
Coil current: 10mA (max)


Hmmm, looks a on the optomistic side, 24V @10mA

Yes, 240mW is difficult for a 16A relay, particularly if it has to
meet stringent European safety standards. It's probably impossible if
you need long life (>50~100k operations) as well.


Best regards,
Spehro Pefhany
 
Top