R
Richard Perkins
I need some help with a Sailor RT2047 that came with a boat I brought. I
had the instructions for programming in a couple of private channels and
managed this with no problem. Unfortunately somehow when in the programming
mode the eprom lost all the settings in it's memory slots, and now the set
will not work.
Somehow I need to find out what the defualt settings / hex codes are
supposed to be. The set has 5 service programs. Does anyone out there know
the correct settings for Service programs 0 , 1 & 2.
Regards, Richard
Please disregard the earlier post it had the wrong e-mail.
had the instructions for programming in a couple of private channels and
managed this with no problem. Unfortunately somehow when in the programming
mode the eprom lost all the settings in it's memory slots, and now the set
will not work.
Somehow I need to find out what the defualt settings / hex codes are
supposed to be. The set has 5 service programs. Does anyone out there know
the correct settings for Service programs 0 , 1 & 2.
Regards, Richard
Please disregard the earlier post it had the wrong e-mail.