I purchased this ball screw linear actuator with 12v stepper motor in the link below. I was thinking that I could control it with a standard motor controller that I already had, but it seems that I need a stepper motor controller.
These are the specs that they list, TIY for the help!
Name:42 Motor Lead Screw Slide
Model:659208
Specifications
Color:silver+black
Materials:aluminum alloy
Size:450*64*50mm
Slide Width:78mm
The Number Of Sliders:1
Horizontal Load:56KG
Vertical Load:15KG
Current:1.2A
Voltage:12V
Resistance:3.2 ohms
Step Angle:1.8º
Torque:45N.cm
Accuracy:0.1mm
Round Trip Accuracy:0.1-0.5mm
Ambient Temperature:-10º~50º
Slide Stroke:300mm
https://www.ebay.com/itm/1204-Ball-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
These are the specs that they list, TIY for the help!
Name:42 Motor Lead Screw Slide
Model:659208
Specifications
Color:silver+black
Materials:aluminum alloy
Size:450*64*50mm
Slide Width:78mm
The Number Of Sliders:1
Horizontal Load:56KG
Vertical Load:15KG
Current:1.2A
Voltage:12V
Resistance:3.2 ohms
Step Angle:1.8º
Torque:45N.cm
Accuracy:0.1mm
Round Trip Accuracy:0.1-0.5mm
Ambient Temperature:-10º~50º
Slide Stroke:300mm
https://www.ebay.com/itm/1204-Ball-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649