help me find repair shop for older Pioneer Elite stable platter CD Transport

[Hi fi fan]

I own a rare Pioneer Elite PDS-95, a CD transport based upon the
Pioneer PD-65 and Pioneer PD-75, using the stable platter system. (see
pix and short info at http://www.elitestereo.netfirms.com/pd-s95.htm )


I recently had a shop replace the laser assembly, but they are not
competent to perform an alignment of the laser assembly. (They did try
without success). I have the original service manual with microfiche,
but I cannot seem to find a shop with the experience to complete this
process. I have been told it is a bit more complex than with standard
cd players.

I tried contacting Pioneer for a reference, but they were of no help,
directing me to their web site where they list lots of places, none of
which seems to know this unit or its cousin, the PD-65.

Any one out there with experience or a reference?

 

[Mike Kennedy]

I would suggest trying around and see if you could get some place to take a
crack at aligning it.. Where are you located? Mabe someone here lives close
to you and might fix it for you for a small fee..

Good Luck,

- Mike

 

[Ampdoc]

I can do it. It's a pain in the a** so it's not cheap. $75.00+ return
shipping. Our shop is a Pioneer ASC and I've been working on Pioneer product
for 15 years.


--
Jammy Harbin
J & J Electronics, Inc.
227 S. 4th St.
Selmer, TN 38375
731-645-3311