Maker Pro
Maker Pro

Help identifying power supply and connector?

Hi there people,

So much knowledge on here, hope someone can help!

I'm a working musician and I need a replacement power supply for my effects pedals.

The only problem is I can't find one anywhere and I'm not really sure what the connection I have is called.

If anyone can point me in the right direction and educate me a bit I'd be very grateful.

Thanks,

Joe
 

Attachments

  • Screen Shot 2013-04-02 at 18.35.04.jpg
    Screen Shot 2013-04-02 at 18.35.04.jpg
    7.7 KB · Views: 127
  • Screen Shot 2013-04-02 at 18.36.50.jpg
    Screen Shot 2013-04-02 at 18.36.50.jpg
    32.4 KB · Views: 126
  • Screen Shot 2013-04-02 at 18.37.27.jpg
    Screen Shot 2013-04-02 at 18.37.27.jpg
    18 KB · Views: 147
Thank you very much, I've popped them an e-mail. I was not sure if I could find a similar replacement elsewhere.

Out of interest, is there a name for that connector?!
 
Out of interest, is there a name for that connector?!
A name proper, probably not... It appears to be either a proprietary connector or some odd ball connector...

Not saying you won't find it if you kept looking, you very well might... The wall wart is easy enough to find, but having worked in the music business myself I know that there are venues that get stupid silly about any 'repaired' wiring being plugged in... Thus the reason I suggest you get a new one since you mentioned being a working musician... Hopefully they don't rake you over the coals on the replacement...
 
Top