Help Identify Component on Dynex TV Power Supply BA71G0F01043

[Josephur]

Trying to repair a Dynex DX-LCD37-09 LCD TV, symptom was TV would not stay on, found a short on the power supply between two wires coming out of the Backlight Inverter/Power Supply unit, putting electrical tape over these allows the TV to operate normally however I want to replace all components at the source of the plug these wires are on, but I have no clue what this part is (some kind of coil), or how to source it.

Board info:
Sylvania A71GDMUT (BA71G0F01043) Power Supply / Backlight Inverter

On side of the component in question:
3PC0XB002 JS HVT-111 080607

Googling this is getting me nowhere!

 

[dorke]

Welcome to EP.
It is a HV transformer.
Was it shorted? why do you want to replace it?

 

[Josephur]

Thanks for the welcome!

The wires coming out of the connector that goes to it were shorted (plastic melted through) and this particular transformer makes a lot more high pitched squealing than any of the other 7 on the board. Figured it would be best to replace it and not just the wires.

 

[dorke]

The proper way is to look at the service manual.
But it may be easier to get help from Dynex support here

 

[kellys_eye]

putting electrical tape over these allows the TV to operate normally

Personally I'd leave it alone and use the set until it fails completely. I mean.... it's 720p..... time for an upgrade!