good autorouter

[Johan Wagener]

I need a simple easy to use program that can do the following. I will give
it the circuit diagram. It must then create and route a PC board in a single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all the
nets. I need a program that will move the components as well to give the
smallest possible design.

 

[Boris Mohar]

I need a simple easy to use program that can do the following. I will give
it the circuit diagram. It must then create and route a PC board in a single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all the
nets. I need a program that will move the components as well to give the
smallest possible design.

It is called "Human"

--

Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs http://www3.sympatico.ca/borism/
Aurora, Ontario

 

[Ed]

Lol and the auto placer on any protel does really amusing things.

 

[Ed]

But I recon the autorouter is good, with a little fiddling.