B
brian
http://nxtwave.tripod.com/suctionpump/index.html
the part that creates is now animated. The suction producing part can be
scaled up fairly well. (I used 3 inch pipes in a device 6 ft high). I
suggest connecting it to a vacuum opperated airlift pump instead of the
unanimated diagram on the link above. Nobody makes vacuum opperated airlift
pumps so you must design it yourself!
You can find out about airlift pumps, pulser pumps, etc on the first link
below
Brian White
the part that creates is now animated. The suction producing part can be
scaled up fairly well. (I used 3 inch pipes in a device 6 ft high). I
suggest connecting it to a vacuum opperated airlift pump instead of the
unanimated diagram on the link above. Nobody makes vacuum opperated airlift
pumps so you must design it yourself!
You can find out about airlift pumps, pulser pumps, etc on the first link
below
Brian White
