-
Categories
-
Platforms
-
Content
1. That's not an oscilloscope - there's no way to take any useful measurement from the signal.
2. What's the actual POINT of this post?
2. What's the actual POINT of this post?
Ok, tell me the frequency and amplitude of the signal it is displaying.
tell me then why they even have the screen?
Okay .... that was just a little painful to my audio engineer ear.
Step back and give an honest listen to produced track Kj6EAD responded with.
No ... really .. listen and compare.
Panzermensch gets their sound from a relatively clean sample and effective use of a compressor to give the beat it's punishing tone without cracking the enamel off your teeth like your flagrantly saturated sample does.
Once you cut down the signal with a comp, you can then turn it up without clipping. from an electronics standpoint, its within specs, From a human ear standpoint, its cranked past 11.
there is very little that can be done with what you have produced.
Step back and give an honest listen to produced track Kj6EAD responded with.
No ... really .. listen and compare.
Panzermensch gets their sound from a relatively clean sample and effective use of a compressor to give the beat it's punishing tone without cracking the enamel off your teeth like your flagrantly saturated sample does.
Once you cut down the signal with a comp, you can then turn it up without clipping. from an electronics standpoint, its within specs, From a human ear standpoint, its cranked past 11.
there is very little that can be done with what you have produced.
