Maker Pro
Maker Pro

Woo-Woo Free Energy From Pulsed DC Transformer

Status
Not open for further replies.
Hi
What do you think about a transformer pulsed with DC current and use parallel path magnets to reinforce magnetic induction?
This quick pulsed DC generate exploited Back EMF After switching.
The magnet redirect magnetic flux.
Thanks for your constructive criticism.
https://img15.hostingpics.net/pics/7233530006.png
7233530006.png
 
Exploiting "Back EMF After switching" is called a flyback power supply. This was invented in the late 1800's, so you are about 118 years late.

ak
 
Switch mode power supplies use this principle, you can get an efficiency of 80% or if you are very good 90%. You cannot get a COP of greater than 1, there are always losses.
 
Status
Not open for further replies.
Top