Maker Pro
Maker Pro

Elektor Electronics.

I

ian field

The September issue was supposed to include a free LED driver PCB - mine
didn't!

Can anyone describe to me how it was attached? This is not the first time
Elektor has arrived sans freebie and as usual the newsagent vigorously
denies any knowledge of it - I'm starting to suspect foul play!

TIA.
 
P

petrus bitbyter

ian field said:
The September issue was supposed to include a free LED driver PCB - mine
didn't!

Can anyone describe to me how it was attached? This is not the first time
Elektor has arrived sans freebie and as usual the newsagent vigorously
denies any knowledge of it - I'm starting to suspect foul play!

TIA.

Well, the picture is on the cover and the description inside. The pcb
measured roughly 16x11mm and most of them had the top of the coil damaged.
It was packed in a just fitting, plastic bag which was glued to the cover.
As the issue itself - including the pcb - was wrapped in its plastic it is
unlikely it get lost accidentally.

petrus bitbyter
 
D

Don McKenzie

petrus said:
Well, the picture is on the cover and the description inside. The pcb
measured roughly 16x11mm and most of them had the top of the coil damaged.
It was packed in a just fitting, plastic bag which was glued to the cover.
As the issue itself - including the pcb - was wrapped in its plastic it is
unlikely it get lost accidentally.

petrus bitbyter

I would suggest if the magazine wasn't in the plastic cover/envelope,
you contact the publisher. They won't be happy if the magazine has been
tampered with after publication and distibution.

Don...




--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
No More Damn Spam: http://www.wizard-of-oz.com

Serial OLED uses standard micro-SD memory cards.
http://www.dontronics-shop.com/product.php?productid=16659

USB Flash Drive interface for existing products.
http://www.dontronics-shop.com/product.php?productid=16654
 
Top