Wanted: electrical ferrules

[HarryA]

I just soldered five small wires on the end of transformer leads so I could plug them into a solderless breadboard. It would be great if there are crimpable ferrules that would take the larger wire and the other end fits into the breadboard, The ones in the photo crimp on the small thus they lack the large end.

 

[Tha fios agaibh]

There make ferrules in any size you want but you need to make the transition to a smaller size on the other end if that's what you want.

 

[Bluejets]

Bootlace terminals are not made for breadboard.
One could twist in a loose end from a male Dupont Wire Jumper Cable and crimp and heatshrink that I guess.

Have to remember that breadboards are largely for signal wiring and iffy even with that.

 

[HarryA]

Made my own by chemically milling a larger wire and using a butt connector. It's not worth the effort.

 

[(*steve*)]

When I needed to do this I just grab one of these Chinese breadboard jumper leads and cut off one end.