After power to the house had gone out and come back on, the bed lost all functions. Checked the usual then got into the control box. The board had 120v coming in, but I could not find 12v coming out of the transformer. Keep in mind this is a six pin pcb mounted transformer and following the circuits on the board only served to make me more lost than I was. I do not have a pin layout for a six pin transformer, nor do I know where to buy a replacement transformer. My electronics skills are rusty, but i do still have a fundamental knowledge of electronics. Can I replace this transformer? Please help.P.S. Hunted for the board through a healthcare parts provider and they are not able to find one.
Last edited:
