Maker Pro
Maker Pro

drive belt for a motor

S

Suhas Mansingh

Hi,
I am looking for a round belt (about 1.75 diameter) to drive an automatic
CD rack. Does anyone know whe you can get belts of different sizes
-Suhas
 
R

rw

Suhas said:
Hi,
I am looking for a round belt (about 1.75 diameter) to drive an automatic
CD rack. Does anyone know whe you can get belts of different sizes
-Suhas

depends where you live. elecronics distis, repair shops, etc
rw
 
T

TCS

<html><input type crash></html>
begin

Hi,
I am looking for a round belt (about 1.75 diameter) to drive an automatic
CD rack. Does anyone know whe you can get belts of different sizes

do a websearch for "drive belt".

I usually get them from parts express.
 
J

Jerry Greenberg

Call around to any of the major electronic parts suppliers in your
area. There are thousands of types of universal type belts for
electronic equipment servicing. It is best to go with the origional
belt to the supplier, and compare. These belts can run from about
$0.50 to about $10.00 depending on the type. The one you are
describing sounds like a very low cost one.

The only other reliable way is to call the parts department at the
manufacture of your device, and ask them to sell you the origional
belt. The origional belt will be more expensive than the universal
replacement.



Jerry Greenberg
http://www.zoom-one.com
 
J

Jerry Greenberg

Call around to any of the major electronic parts suppliers in your
area. There are thousands of types of universal type belts for
electronic equipment servicing. It is best to go with the origional
belt to the supplier, and compare. These belts can run from about
$0.50 to about $10.00 depending on the type. The one you are
describing sounds like a very low cost one.

The only other reliable way is to call the parts department at the
manufacture of your device, and ask them to sell you the origional
belt. The origional belt will be more expensive than the universal
replacement.



Jerry Greenberg
http://www.zoom-one.com
 
Top