Maker Pro
Maker Pro

Drive a sharp LCD by TOSHIBA chip

Help Please,
Now I have a sharp LCD (model: LS055T3SX05) and a TOSHIBA chip (TC358870XBG).
But first of all, I want to light up the LCD. From what I read there are three pins (LED+, LED-, LED_PWM) related to backlight.
I apply 5v to LED+ with 0v to LED-, for LED_PWM I am using the 3.3v blue pill (arduino) to produce pulse. However, Backlight is still not working......
anyone can help? appreciated!!!!!
upload_2019-8-29_18-27-54.gif upload_2019-8-29_18-27-54.gif
 
Last edited by a moderator:
Top