DIY Electronic Wire Strippers

[Chris Jones]

Too easy to nick a wire when you use a blade. A nicked wire will fail QC
inspection every time. Even small, seemingly insignificant, nicks are a
no-no in military electronics.
Thermal strippers are the way to go

I have never noticed the Ideal Stripmaster nicking wires, provided the
correct blade is used. It has a semicircular cutting blade and a
semicircular recess in the blade for the wire insulation, so that the depth
of cutting is controlled, (presumably so that it does not quite reach the
metal with it cuts through the insulation).

Chris