Maker Pro
Maker Pro

dc motor speed control using dc-dc converter

hai..
i'm currently in designing a dc-dc converter that will be use to
control the speed of a dc motor..
but my problem is..i do not know how to design the dc-dc
converter...could anyone help me with this?
 
T

Tim Wescott

hai..
i'm currently in designing a dc-dc converter that will be use to
control the speed of a dc motor..
but my problem is..i do not know how to design the dc-dc
converter...could anyone help me with this?
There's a good chance you want a four-quadrant amplifier, not just a
DC-DC converter.

At any rate, it's more than you'll find in newsgroup postings. I
suggest you look for a good book on switching amplifier design --
starting by asking for recommendations here isn't a bad thing.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details at http://www.wescottdesign.com/actfes/actfes.html
 
J

Jasen Betts

hai..
i'm currently in designing a dc-dc converter that will be use to
control the speed of a dc motor..
but my problem is..i do not know how to design the dc-dc
converter...could anyone help me with this?

pluse width modulation.

Bye.
Jasen
 
Top