Maker Pro
Maker Pro

Datasheet for BBOPA

  • Thread starter Samuel M. Goldwasser
  • Start date
S

Samuel M. Goldwasser

This part is an 8 pin SOIC with the following marking:

BBOPA
228U
37Z3Y

Google returns lots of hits, but they all are suppliers trying to
sell components with no datasheets even though that's in the
search terms!

Any info appreciated.

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
A

Adam Goldman

This part is an 8 pin SOIC with the following marking:

BBOPA
228U
37Z3Y

Google returns lots of hits, but they all are suppliers trying to
sell components with no datasheets even though that's in the
search terms!

Most likely the suppliers don't know what it is either :)
How about Burr-Brown OPA228U?
http://focus.ti.com/lit/ds/symlink/opa227.pdf

-- Adam
 
S

Samuel M. Goldwasser

Most likely the suppliers don't know what it is either :)
How about Burr-Brown OPA228U?
http://focus.ti.com/lit/ds/symlink/opa227.pdf

Bingo! That is almost certainly what it is.

I should have recognized the OPA part.

Google comes up with the stupid suppliers "BBOPA", but
then the links don't go to a datasheet or they then say that
"sorry no info". Moronic search engines!

Thank you! :)

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
Top