Maker Pro
Maker Pro

Could use some help with a tantalum cap

I could use some help identifying a tantalum cap. I've read the docs, including KEMET's cap identification doc.

I believe the 105 means 100uF (10 with a multiplier of 5)

35 means 35v (this voltage makes sense on this circuit)

Any help with the 404? Does this mean "identifier not found"? lol!


WIN_20211220_23_50_33_Pro.jpg
 
I really appreciate the help.

I'm freshening up a gen 1 - HP 34401A (1994). It had a broken display and a dead a couple of other problems. Now that it's functioning, I want to freshen the caps on this beautiful meter that is ridiculous overkill for my needs.
 
Top