C&K 236i/L - Reseting to Factory Default

[Baz]

Hi there all,
I have entered into my new house and want to change the
alarm code on my C&K 236i/L Alarm panel.

The problem is the previous owner will not give me the alarm code or the
installer code so i can program the panel to suit my needs.

Is there a jumper on the alarm circuit board that can be used to reset set
the panel to the factory default and clear their previous codes?


Thanks...Baz

bastermelcal@hotmail.com

or
bkurt@net2000.com.au

 

[Group-Moderator]

Hi there all,
I have entered into my new house and want to change the
alarm code on my C&K 236i/L Alarm panel.

The problem is the previous owner will not give me the alarm code or the
installer code so i can program the panel to suit my needs.

Is there a jumper on the alarm circuit board that can be used to reset set
the panel to the factory default and clear their previous codes?


Thanks...Baz

bastermelcal@hotmail.com

or
bkurt@net2000.com.au

 

[Stanley Barthfarkle]

As usual, Mikey speaks and says nothing...

 

[Frank Olson]

As usual, Mikey speaks and says nothing...

Careful. Writing things like this could earn you your very own web page
at Goofysplace. Or better... He could decide you're the next
"webmaster".

 

[Stanley Barthfarkle]

Careful. Writing things like this could earn you your very own web page
at Goofysplace. Or better... He could decide you're the next
"webmaster".

Yes, but since I'm anonymous, he won't have very much fun.

 

[Frank Olson]

Yes, but since I'm anonymous, he won't have very much fun.

I'm sure this is the most fun he gets.

 

[Mark Leuck]

Nope you can only default it after getting into programming, if you power it
down and back up there is a chance the installer code will return to default
but thats doubtfull

 

[Mark Leuck]

As usual, Mikey speaks and says nothing...

He's talking to Baz's spirit

 

[Crash]

Have your real estate agent put pressure on the guy to provide the
codes, if he has them and he sold you the house he should provide them
to you.