I have a project that uses an RF Solutions ISM module - http://www.rfsolutions.co.uk/acatalog/info_FM_RRFQ1_433P.html which works well.
I added a Bluetooth module to the project similar to this one http://r.ebay.com/3MNeiS and I get a load of interference that stops the project working.
As can be seen from that attached image everything is mounted on a piece of stripboard and in accordance with RF Solutions the radio module is mounted above the board on short wires.
The question is: does anyone have any recommendations for getting rid of the interference between the bluetooth and the ISM module e.g. screening, low pass filter etc. What is best and how to implement it?
I added a Bluetooth module to the project similar to this one http://r.ebay.com/3MNeiS and I get a load of interference that stops the project working.
As can be seen from that attached image everything is mounted on a piece of stripboard and in accordance with RF Solutions the radio module is mounted above the board on short wires.
The question is: does anyone have any recommendations for getting rid of the interference between the bluetooth and the ISM module e.g. screening, low pass filter etc. What is best and how to implement it?