Maker Pro
Maker Pro

Aiber Water flow sensor

@bertus

Thanks for making me check it, which was a fairly tricky exercise:DIMG_20210208_204750 rev2.jpg
Sticky tape over opening to create air seal of sorts
But I can confirm, it spins, not fast, but definitely spinning
Also discovered that even a 2 sec video is 5mb
 

bertus

Moderator
Hello,

You can not measure the pulses when the sensor is open.
It can well be that it spins now, but will not spin when the cover with the magnet is mounted, due to friction.

Bertus
 
Top