Advice on replacement caps CE-FUX 250v 330uF 105deg.C

[Vox]

Looking into reviving faulty plasma with obvious problem of 5 x bulging
CE-FUX 250v 330uF 105deg.C Electrolytic caps.


http://australia.rs-online.com/web/c/?sra=oss&searchTerm=330uf+250v



Not sure which ones to choose prices vary from $3 to $10 each, any
recommendations?

 

[Trevor Wilson]

Looking into reviving faulty plasma with obvious problem of 5 x
bulging CE-FUX 250v 330uF 105deg.C Electrolytic caps.


http://australia.rs-online.com/web/c/?sra=oss&searchTerm=330uf+250v



Not sure which ones to choose prices vary from $3 to $10 each, any
recommendations?

**Choose the ones that fit the description and size. Focus on the product
which has the longest life-span and best ripple current rating. Check the
Element 14 cattle-dog too.

 

[Vox]

**Choose the ones that fit the description and size. Focus on the
product which has the longest life-span and best ripple current
rating. Check the Element 14 cattle-dog too.

Thanks Trevor, I think I rushed the diagnosis and spoke too soon...



The caps on further inspection look all right.



After removing one of the caps, I notice the only bulge is a piece of
plastic disc
cover over the aluminum casing .



The real problem is the Mitsubishi M63992FP chip burnt to a crisp, that I
can just read.

There is also another chip (IR 21108(0349 IOR)) that has damage to casing.



I don't think I can salvage this; it's headed for the tip.