adding a sprocket to a motor

[[email protected]]

Hi!

I am into building electric bikes.

Can you give me any advice on how to install a sprocket to an electric
motor?

 

[Phil Allison]

I am into building electric bikes.

Can you give me any advice on how to install a sprocket to an electric
motor?

** Well, it is like this:

1. First catch your sproket gear.

2. If the motor shaft has no flat - file a small one.

3. Slide sprocket gear onto the shaft, align the grub screw and tighten it
like mad.


Worked for me.




......... Phil

 

[[email protected]]

that simple?
okay thanks.
so I guess a machine shop would better do the job for more precise and
balanced jobs.


know any site with pictures?

 

[Peter Bennett]

Hi!

I am into building electric bikes.

Can you give me any advice on how to install a sprocket to an electric
motor?

The motor shaft is probably some standard size, and may, or may not,
have a flat or keyway on it. You just have to buy a sprocket that
will fit the shaft diameter, and has a setscrew to secure it to the
shaft (works best with a flatted shaft), or that takes a key to match
the keyed shaft.



--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

 

[Paul Hovnanian P.E.]

You can also buy weld-on sprockets, for which the installation method
should be self-evident, at least in principle.

BTW, this isn't really an electronic design question.

It is now. Someone will have to post a schematic for a PWM controller
for an arc welder.

;-)

 

[Spehro Pefhany]

The motor shaft is probably some standard size, and may, or may not,
have a flat or keyway on it. You just have to buy a sprocket that
will fit the shaft diameter, and has a setscrew to secure it to the
shaft (works best with a flatted shaft), or that takes a key to match
the keyed shaft.

You can also buy weld-on sprockets, for which the installation method
should be self-evident, at least in principle.

BTW, this isn't really an electronic design question.


Best regards,
Spehro Pefhany

 

[Gary Tait]

You can also buy weld-on sprockets, for which the installation method
should be self-evident, at least in principle.

The sprokest ar jsut plain sprockets you weld onto a hub, the hup you
attach to your motor shaft.

For the likes of a bike, I'd think you need a keyed shaft and hub, and a
key.

 

[Jon Slaughter]

The sprokest ar jsut plain sprockets you weld onto a hub, the hup you
attach to your motor shaft.

For the likes of a bike, I'd think you need a keyed shaft and hub, and a
key.

and maybe some grease too?