T
The Saccullo's
If you use a longer clock than recommended, (ie. using FROSC/64 when FROSC/8
is recommended) what happens?
Specifically I'm considering using a long cycle time as part of a keypad
denounce routine. But if the PIC clears the 'DONE' bit once it has the data
even though there is time left on the clock then this won't work.
is recommended) what happens?
Specifically I'm considering using a long cycle time as part of a keypad
denounce routine. But if the PIC clears the 'DONE' bit once it has the data
even though there is time left on the clock then this won't work.