hello, I hope you are well.
i am wondering, if there are 30 x 10v motors to be powered and each can have a peak current use of 800 ma or less.
30 x 800ma = 24000ma = aprox 24amps or less at any given time.
( ^ i think i am right on that : )
i am wondering how to power all of these without blowing a fuse. maybe there are psu's that can be bought online?
But if i had to make my own i would like the motors to be powered from one psu box. But i am slightly baffled on this as most iec (kettle) leads are rated at a maximum 13amps. so, would I have to make a special power lead to mains that can handle such high amps. ( and i wonder about the main fuse box too)
Well as you can see i have little ideas here , so any kind of info would be great.
thanks for ideas : )
i am wondering, if there are 30 x 10v motors to be powered and each can have a peak current use of 800 ma or less.
30 x 800ma = 24000ma = aprox 24amps or less at any given time.
( ^ i think i am right on that : )
i am wondering how to power all of these without blowing a fuse. maybe there are psu's that can be bought online?
But if i had to make my own i would like the motors to be powered from one psu box. But i am slightly baffled on this as most iec (kettle) leads are rated at a maximum 13amps. so, would I have to make a special power lead to mains that can handle such high amps. ( and i wonder about the main fuse box too)
Well as you can see i have little ideas here , so any kind of info would be great.
thanks for ideas : )