zigbee module

[enrakeshkumar]

I have a zigbee module cc2500(onlysupport.co.in).
It has a facility to measure rssi value
But i dont know how to use it.
Please help me to measure rssi value of the received signal
I need to use rssi as a reference value and i am going to use arduino uno.

Thank u

 

[Amol Shah]

I don't think anyone other than the onlysupport guys can help as it looks a customised product designed by them along with their own microcontroller. I hope the only support guys can provide support

 

[hevans1944]

Lots more information is available on this page. Download the DATASHEETS referenced near the bottom of the page and read them. Do your own homework! Reading the RSSI value requires access to control registers in the RFM75 data modem via its 4-pin SPI data link. The documentation may tell you whether or not the RFM75 registers can be accessed from the serial RS-232 communications port via the on-board Atmel μP. In other words, does the Atmel programming allow control of the RFM75 from the RS-232 port? Please read all the available documentation before posting more questions here.

 

[Harald Kapp]

@enrakeshkumar : This is your 3rd thread on this topic. I already closed one other and I will close this one, too, as it the older of the two remaining threads.
I kindly ask you not to open a new thread when there is already an open thread on the same topic.