Maker Pro
Maker Pro

xerox 510dp AC module A1


hi ...... friends i am a new
I have the same problem but I did not understand what to do.
Please help and give me the steps he has done. Thank you
------------------------------------------------------------------------------------
photo for my ac module
 

Attachments

  • 32313005_1073342299479981_1448434126657945600_n.jpg
    32313005_1073342299479981_1448434126657945600_n.jpg
    117.6 KB · Views: 67
  • 32325775_1073342479479963_710286474343350272_n.jpg
    32325775_1073342479479963_710286474343350272_n.jpg
    122.5 KB · Views: 68
  • 32327044_1073342349479976_5821339282190630912_n.jpg
    32327044_1073342349479976_5821339282190630912_n.jpg
    119.9 KB · Views: 79
  • 32349286_1073342249479986_6893507889734877184_n.jpg
    32349286_1073342249479986_6893507889734877184_n.jpg
    125.9 KB · Views: 82
  • 32461437_1073342019480009_8048135445546008576_n.jpg
    32461437_1073342019480009_8048135445546008576_n.jpg
    117.3 KB · Views: 82
Sir copyplan . . . . .

Your Russkie is not being so good today ?

He found that . . . .
Bridge Rectifier Single Phase 600V 35A -
GBPC3506W
Was being bad and had to replace it.
Expect associated parts / fuses likely to have been damaged also.
Plus heat sink compound is to be used.
The printer was displaying error codes
LL-45 LL-81 . . . . . . .walidcharifi

73's de Edd
.....
 
Last edited:
Your Russkie is not being so good today ?

He found that . . . .
Bridge Rectifier Single Phase 600V 35A -
GBPC3506W
Was being bad and had to replace it.
Expect associated parts / fuses likely to have been damaged also.
Plus heat sink compound is to be used.[/QUO
thanks ...... very thanks.
This video is not me I met him on the net ..... I suffer from the same problem and I could not solve it I ask the people of the help and explain what was done by this Russian in the video and give me a detailed outline and the piece that he added
 

Attachments

  • 4.jpg
    4.jpg
    56.8 KB · Views: 62
Sir copyplan . . . .

On that unit, it seems that he replaced the FWB rectifier up near the heat sinks where you made your RED oval and it also looks like a " bodged" quality of workmanship, replacement of another unit on the chassis where he has the 1-2-3-4- markings and the exposed RED BLACK wire sets.
Within all of the 442 pages of that units service manual, this is the most info that was given . . .below . . . .

upload_2018-5-15_4-20-19.png


73's de Edd . . . . .
.....
 

Similar threads

Top