Maker Pro
Maker Pro

Willem programmer protocol

P

Pawel Kraszewski

HellO!

I have a Willem-compatible EPROM/FLASH/MCU/Whatever necessary programmer. I
have some software with it, but guess - windows only. (no, it doesn't run
on my WINE).

I decided to write my own application (at least for the basic MCUs, like
AVRs and 89C*051), but I stuck at the protocol.

My question is: is there any documentation on how to program this kind of
programmer? I found, that some LPT lines control VCC and VPP but that's how
far I got.

Any help would be greatly appreciated,
best regards,
 
Top