Maker Pro
Maker Pro

Very low input power Switched Mode Power Supply

Hi,

Does anyone know of a switched mode power supply that can take very
low input, say 1 or 2 volts and can be configured to have no
constraint on output voltage?

Thanks.

Steve.
 
J

JeffM

stevenwrig@ hotmail.com said:
Does anyone know of a switched mode power supply
that can take very low input, say 1 or 2 volts
and can be configured to have no constraint on output voltage?

The Gold Standard on Usenet (this is NOT "Google Groups")
http://groups.google.com/group/alt....*-*-*-*-is-now-legendary+zzz+*-summary+qq+Web
is to chose ONE group where the question is most appropriate.

If you MUST post the *same* question to MULTIPLE groups,
**this** is the proper technique:
http://www.google.com/search?q=cach...arked-as-Read-in-ALL-*-groups+Newsgroups.line

Using an email address as a username on Usenet
makes you look like a clueless noob as well.
For Google Groupers: http://groups.google.com/groups/mysubs
 
D

dBc

Greetings Steve..

Regarding:
"...low input, say 1 or 2 volts and can be configured to have no
constraint on output voltage..."

You're kidding - right? If not, you need to review your basic
electronics coursework again.

Cheers,
Mr. Mentor


| Hi,
|
| Does anyone know of a switched mode power supply that can take very
| low input, say 1 or 2 volts and can be configured to have no
| constraint on output voltage?
|
| Thanks.
|
| Steve.
 
Top