USB to PCMCIA Bridge Component!

[Jay,Jeong]

I would search a USB to PCMCIA Bridge or Controller device.
If you may know or recommend for this device, please let me know about
a vendor and
part# for this device.

Thank you!

 

[Ian Stirling]

I would search a USB to PCMCIA Bridge or Controller device.
If you may know or recommend for this device, please let me know about
a vendor and
part# for this device.

Why.
There are numerous USB to IDE chips, which could be used with PCMCIA
cards in 'true IDE' mode, if it's a disk.

 

[Jay,Jeong]

Ian Stirling ÀÛ¼º:

Why.
There are numerous USB to IDE chips, which could be used with PCMCIA
cards in 'true IDE' mode, if it's a disk.

First of all, thank you for your response!

I am expected to develop the mobile equipment as a PCMCIA Type and will
use a core
processor like a SoC(System on Chip, ASIC)
Even though this mobile equipment must have a PCMCIA Interface to
connect with host(Notebook), SoC doesn't supply PCMCIA Interface
Signals, but only has USB Interface Signals.

Therefore I should search a bridge component or controller to transfer
USB signals into
PCMCIA signals.

If you may know this bridge components, please let me know the vendor
and part#.

Thank you!

 

[joseph2k]

Ian Stirling 작성:


First of all, thank you for your response!

I am expected to develop the mobile equipment as a PCMCIA Type and will
use a core
processor like a SoC(System on Chip, ASIC)
Even though this mobile equipment must have a PCMCIA Interface to
connect with host(Notebook), SoC doesn't supply PCMCIA Interface
Signals, but only has USB Interface Signals.

Therefore I should search a bridge component or controller to transfer
USB signals into
PCMCIA signals.

If you may know this bridge components, please let me know the vendor
and part#.

Thank you!

What you should do is replace the USB interface module of the unit with a
PCCARD module. What is the issue? Just buy the IP. Gluing it in is an
exercize for the undergraduate student.